 NO: 01 FACE MILL GRINDING ATTACHMENT |
 |
This attachment comprises a base, swivelling
horizontally with respect to table, and a workhead swivelling at 15 degree
angle. This construction simplifies greatly the setting of elevation and
depression angle. Further more, rugged design gives the M-40 the capacity for
grinding large size cutters and tools.
Capacity: Max. dia. of cutter -
457mm | |
| NO: 02 RADIUS GRINDING ATTACHMENT |
 |
This is ideal for sharpening the radil of ball end
mills and styli. It consists of two slide bases, each with micrometer adjustment
and a workhead having a M.T. No. 5 or No. 12 taperhole spindle. Indexinng of
straight flutes cutters is possible by using an index plate mounted on the back
of workhead.
Capacity: Radius-0-50mm | |
| NO: 03 RADIUS GRINDING ATTACHMENT |
 |
This is suitable for comer radius grinding of face mill
and shell end mills. The position for grinding start is set by the micrometer to
eliminate grinding error. The grinding capacity of this attachment is 0 through
1" radii (0 throught 25mm) and 0 to 12" cutter diameter (0 through
300mm)(Capacity: Radius-0-25mm; Max. dia. of cutter-300mm) An accurate radius on
the comer of teeth can be ground. | |
| NO: 04 CYLINDRICAL GRINDING ATTACHMENT |
 |
This attachment is most suitable for straight or taper
cylindrical grinding and for face grinding of various tools.
Capacity:
Swing-10"(250mm); Main spindle speed-310mm(50c/s), 370rpm(60c/s): Motor
1/4Hp-02Kw | |
| NO: 05 HELICAL GRINDING ATTACHMENT |
 |
This attachment is suitable for grinding the relief and
rake angle of spiral cutters or the straight teeth of hobs, end mills and center
drills. The work spindle is possible to be tumed twice at Max. for the lead of 0
throught infinity.
Taper hole of work spindle is M.T. No.4. Lead:
0-8(stepless)
Spindle tums twice at max. Index: 24(Standard) Grinding length:
max. 12 1/2"(320mm) (in case that helix angle is 0¢X)
Module (hob): max. 8
Helix(Hob): max ¡Ó8¢X | |
| NO: 06 INTERNAL GRINDING ATTACHMENT |
 |
This is generally used with the Cylindrical Grinding
Attachment. Of course, it can be used for grinding internal tapers.
Capacity:
Intermal spindle-20,000rpm
Length of hole up to 1 9/16" or 3"(40mm or
74mm)
Range of bore to bo ground: 5/16'(8-20mm) or
1/2~2"(12-50mm) | |
| NO: 07 WORKHEAD INDEXING ATTACHMENT |
 |
Accurate indexing can be made quickly and easily by
mounting the Indexing Attachment on the standard workhead. This eliminates the
need for a tooth rest which is normally required for grinding cutters. If not
specified, workhead indexing attachment is provided with a plate of twenty four
equally apaced slots, includes one 24 notched index plate Extra index plates ...
specify number of notches desired. | |
| NO: 08 EXTENDED GRINDING WHEEL SPINDLE |
 |
This attachment offers extreme convenience when the
extended spindle application is required. As this spindle is also cartridge type
construction, it is readily interchangeable with standard spindle. Spindle
extension is 3"(75mm) Extension Convenient when the extended spindle application
is required. Spindle is also cartridge type and interchangeable with standard
spindle. | |
| NO: 09 SURFACE GRINDING ATTACHMENT |
 |
This is a so called "Universal Vise" and ideally auited
to grinding bits as well as surface grinding. It consists of swivel vise and
base. The intermediate support permits the vise to swivel 360 degrees
horizotally and vertically, so the work-piece can be set easily.
Capacity:
Widthe of vise--4"(100mm); Depth of vise -- 1"(25mm) Opening-2
3/4"(70mm) | |
| NO: 10 DRILL POINTING ATTACHMENT |
 |
This attachment have been designed to provide a simple,
effective means of sharpening drills accurately with the minimum of skill. The
drill itself is held in a precision six jaw self-centering chuck, suitably
geared to the operating handle. | |
| NO: 11 LATHE & PLANET TOOL GRINDING ATTACHMENT |
 |
This attachment facilitates setting cutters for
grinding rake and relief angles. The large work support provides and outstanding
grinding capability. This attachment is ideally suited to grinding cutters for
lathes and planers.
Capacity: 3/8'~1 1/2"(10-38mm)
Converient for grinding
rake face and relief angles. | |
| NO: 12 SPRING COLLET CHUCK |
 |
This chuck can be mounted directly in the taper hole of
the workhead a ASA No. 50. This is an indispensable attachment for small cutter
grinding. Spring Collet Chuck for larger size cutters or adapter for 5C collets
is is also available. Size of collets: 6, 8, 10, 12, 16, 20, 25mm or 1/4, 5/16,
3/8, 1/2, 5/8, 3/4, 1 inches | |
| NO: 13 WET GRINDING ATTACHMENT |
  |
This is so called "Coolant Supply System". It is
conveniently used for cylindrical, intemal, surface and various cutters grinding
works when necessary. Coolant pump motor ...
1/8HP(0.1Kw) | |
| NO: 14 DUST COLLECTOR |
 |
This accessory contributes toward operator safety and
his health by collecting dust particles flying off the grinding wheel during
grinding. It is compact and consumes a minimum of floor
space. | |
