| CM-2 Specifications |
| Capacity |
| Workhead-- |
|
|
| Swing over main slide, max dia |
304mm |
12" |
| Collet work dia, |
max |
30mm |
1.25" |
| |
min |
3mm |
0.12" |
| Lead generated by spiral lead machanism, min |
45mm |
1.81" |
| Lead between spindle nose and tail center, max |
152mm |
6" |
| Wheelhead-- |
|
|
| Grinding wheel dia, max |
100mm |
4" |
| Range |
| Workhead-- |
|
|
| Main slide travel |
146mm |
5.75" |
| Offset slide travel, total |
133mm |
5.25" |
| -front of center |
76mm |
3" |
| -rear of center |
57mm |
2.25" |
| Workhead angular adjustment-- |
| Horizontal plane (rurmatable base) |
235° |
|
| Vertical plane, above center |
40° |
|
| below center |
40° |
|
| Wheelhead-- |
|
|
| Longitudinal slide travel |
152mm |
6" |
| Vertical slide travel, total |
241mm |
9.50" |
| -above center |
114mm |
4.50" |
| -below center |
127mm |
5" |
| Cross slide travel, total |
190mm |
7.50" |
| -front of center |
76mm |
3" |
| -rear of center |
114mm |
4.50" |
| Spindle Speeds |
| Workhead, one speed |
436rpm |
|
| Wheelhead, three speeds |
4000, 5729, 8000rpm |
|
| Motors, Electric |
| Workhead drive, AC |
1/4HP |
0.186kw |
| Wheelhead drive, AC |
1/2HP |
0.373kw |
| Floor Space and Weight |
| Area of base only |
635mm x 660mm |
25"x26" |
| Area required for machine |
1524mm x 1701mm |
60"x67" |
| Height from floor to center of workhead spindle |
1212mm |
47.72" |
| Height, overall with wheelhead raised |
1517mm |
62.12" |
| Net weight |
691kg |
1525lbs | |
CM2 - MONASET Tool Grinder
Sharpen, and reconditions parts with Complex shapes