HOME > Products > Cutter Grinder > M-40 Universal Cutter Grinder > Feature

STANDARD EQUIPMENT
2. Left-hand tailstock
 
1. Workhead
4.Diamond dresserholder
 
3.Right-hand tailsock
 
5. Wheel guard
6. Wheel guard
7. Wheel guard
8. Wheel guard
9. Wheel guard holder(long)
10. Wheel guard holder (short)
11. Universal tooth rest plate and
Blade holder extension
12. Center gauage
13. Collet wrench
14. Plain tooth rest holder(with offset blade)
15. Ejector rod
16. T-wrench for grinding wheel sleeve
17. Sleeve extracting bar
18. Pin wrench
19. Micrometer adjustable toothrest
(with round top blade)
20. Levelling pads(3 pcs)
21. Touch-up paint
22. Plain tooth rest holder(withoffset blade)
23. Reducing collet B & S No.12xNo.10
(or MT No.5 x No.4)
24. Reducing collet B & S No.12xNo.9
(or MT No.5 x No.3)
25. Reducing collet B & S No.12xNo.7
(or MT No.5 x No.2)
 
25.Grinding wheel sleves(5sets)
 
26.Grinding wheel(6¡ªx3/4¡ªx1 1/4¡ª)
27.Grinding wheel(6¡ªx3/4¡ªx1 1/4¡ª)
28.Grinding wheel(6¡ªx1/2¡ªx1 1/4¡ª)
29. Grinding wheel(6¡ªx1/2¡ªx1 1/4¡ª)
 
30.Grinding wheel(3¡ªx1/2¡ªx1 1/2¡ªx1 1/4¡ª) 31.Grinding wheel(4¡ªx1/16¡ªx1/2¡ª)
32 Grinding wheel(5¡ªx1 1/2¡ªx1 1/4¡ª) 33.Grinding wheel(3¡ªx1/2¡ªx 1/2¡ª)
34.Double end wrench 35.Nut wrench
36.Driver 37.Nut wrench
38.Allen type wrench 39.Washer for 1/8¡ª dia.grinding wheel
40.Center for workhead spindle B & S No.7
(or MT No.2)
41.4¡ªspindle extension
42.4¡ªextension wheel sleeve and collar
43.Belt for spindle drive(Poly-flex belt)
44.Draw-in bolt for workhead and washer
45.Tool cabinet
46.Extension and washers of slit-saw
And side-mill cutters.
SPECIFICATIONS

Capacity: Inch Metric  
Swing over table 10¡ª 250mm
Distance between centers 27 1/2¡ª 700mm
Distance between tailstock & workhead 22 3/4¡ª 580mm
Taper hole in workhead spindle one end ASA No.50
Other end M.T.No.5 or
B & S No.12(Specify by order)		  
Table:  
T-Slot(numer & size) one 0.565¡ª +0.05mm
15.00mm
0.563" -0.00mm
Working surface 5 5/16¡ªx37¡ª135x940mm
Grinding wheel spindlw rpm 2600,3700,6200
Grinding wheel spindle motor 1HP 0.75kw
Range of movement:  
Longitudinal movement of table 16¡ª400mm
Cross movement of saddle 10¡ª250mm
Graduation for table swivel movement +-60¢X
Table graduation on end,for taper of +-10¢X
Vertical movement of wheel head 10¡ª250mm
Wheel head tilts +-15¢X
Wheel head swivels 360¢X
From wheel spindle center to top of table max.12¡ª300mm
Min.2¡ª 50mm
From wheel spindle center to T-slot center max.16 1/2¡ª415mm
Min.6 1/2¡ª165mm
Required floor space 61¡ªx68 1/2¡ª1550x1735mm
Net weight of machine 25601bs. 1160kgs
Dimension of Packing case K1460x1460x1510mm

MAIN DIMENSIONS