HOME > Products > Cutter Grinder > CMA Monaset Cutter Grinder

 

Feature
Cutter Grinder
Accessories Features

The CM-A Series is equipped with a linear scale and digital readout systems on the X, Y and A axes. The High Precision Camera Device(C.C.D.)provides maximum operational convenience, accurate positioning,increased efficiency and allows for on-line quality control.

The machine features many versatile functions. It is ideal for precision grinding and regrinding for angles,arcs and profiles especially for small cutters.
 
Specifications
Capacity
Workhead:
Swing over main slide,max.diam.|----------- 304mm
Collet work diam.,max.|------------------------ 32mm
Min|------------------------------------------------ 3m
Lead generated by spiral lead mechanism,min---------------------------------- 0~45°
Length between spindle nose and tail center,max.-------------------------------------- 152mm
Wheelhead:  
Grinding wheel diam.max.|-------------------- max 100Ømm
Motors,Electric:  
Workhead drive,AC----------------------------- 1/4HP
Wheelhead drive,AC---------------------------- 1HP
Floor Space and Weight:  
Area of base onlyn------------------------------ 635mmx660mm
Area required for machinen-------------------
(including swivel and overtravel movements) 		1524mmx1701mm
Height,overall with wheelhead raised------- 1577mm
Net weight (including motors and controls) 691kg
Range :  
Workhead:  
Main slide travel-------------------------------- 146mm
Offset slide travel,total------------------------- 133mm
-front of centere--------------------------------- 76mm
-rear of center ----------------------------------- 57mm
Workhead angular adjustment:  
Horizontal plane(turntable base)------------- 235°
Vertical plane,above center------------------- 40°
Wheelhead:  
Longitudingal slide travel---------------------- 152mm
Vertical Slide travel,total--------------------- 241mm
-above center------------------------------------ 114mm
-below center----------------------------------- 127mm
Cross slide travel ,total----------------------- 190mm
-front of center----------------------------------- 76mm
-rear of center------------------------------------ 114mm
Spindle Speeds:
(0%,-8% variation allowed) Workhead,one speed
Workhead,one speed--------------------------- 436mm
Wheelhead,three speeds---------------------- 40000,5729,80000rpm